December 1New requirements for 5 groups: grocery products, animal feed, clothing and household linen, and 2 more · What to do
EN
Sign inTry for free

For wholesale and retail

UTD receipt: every code checked before signing

Incoming UTDs from EDO Lite appear in Truemark on their own. Pallets and boxes are opened down to the last unit, and every code is checked in Chestny ZNAK before the truck even arrives. Goods are checked with a scanner or handheld terminal, and after signing Truemark checks that the codes have passed to you.

30+
checks of the document, codes and packages before signing
6 groups
from the document to control after signing
5 min
between EDO Lite checks; new UTDs appear on their own
3 results
of signing: accepted, with discrepancies, not accepted

How it works

Six steps from EDI to codes on your balance

Receipt in Truemark is an account section for the buyer. The document is checked before signing, not after Chestny ZNAK rejects it, and you see what’s wrong, down to the box and line.

  1. 1

    The UTD arrives on its own

    Truemark collects incoming documents from EDO Lite every 5 minutes, rereads the whole list once a day, and does it immediately when you click “Sync”

    every 5 minutes
  2. 2

    Packages are opened down to units

    Pallet, box, group package, set: Truemark asks Chestny ZNAK level by level until it reaches every unit. Checks and counters run by units.

    any nesting
  3. 3

    Checks before the truck arrives

    The contents are loaded and checked right after receipt. Each code is checked in Chestny ZNAK, and the document by the official GIS MT preliminary check.

    stop, risk, info
  4. 4

    Checking against the goods

    You scan boxes or units with a scanner at the computer or on a handheld terminal. Surplus, shortage and mis-grading are visible before signing. You can also accept without scanning.

    scanner or handheld terminal
  5. 5

    Signing with a result

    You sign in the account with an electronic signature and a receipt result. Truemark suggests the result and drafts the discrepancy text for the supplier.

    3 results
  6. 6

    Control after signing

    Truemark waits for Chestny ZNAK’s response and uses a control request to check that the codes have passed to you. A rejection comes with the error number and its meaning.

    codes on your balance

Checks

Six groups of checks and what they protect you from

Each check raises a finding at one of three levels. You set the levels for shelf life and permit documents in the receipt settings; the rest are preset.

Stop

Chestny ZNAK won’t accept the document or the codes won’t pass to you. A single such code gets the whole document rejected.

Risk

The document will go through, but the goods may turn out unsellable or your records may diverge from reality

Info

For information: doesn’t affect receipt, but worth knowing

1

Chestny ZNAK will accept the document

The code exists in Chestny ZNAK, is in circulation, isn’t blocked and belongs to the supplier. Your group is connected, and you haven’t accepted this document before.

What it protects you fromBecause of a single foreign or retired code, Chestny ZNAK rejects the whole document, and not a single code passes to you
Check the supplier before receipt: whether they are registered for your product groups
What we checkLevel
The code doesn’t exist in Chestny ZNAKStop
The code isn’t in circulation: not introduced yet, already retired or in another statusStop
The code is blocked: sale suspended by a decision of a regulatory authorityStop
The code belongs to another company, not the supplierStop
The code is already yours: it was accepted earlier under another documentStop
The code’s product group isn’t connected for your companyStop
The document has someone else’s buyer INNStop
The KPP of another of your divisionsRisk
The official GIS MT preliminary check found an error, with its number and meaningStop
There is already a document from this supplier with the same number and dateRisk
The receipt deadline is running or has expired; a reminder comes the day before the last dayInfoRisk
2

The goods can be sold

Shelf life, remaining shelf life and permit documents. You set the threshold and strictness of these checks.

What it protects you fromYou won’t accept expired goods or goods that can’t be sold later
What we checkLevel
Shelf life expiredStopconfigurable
Less than the set share of the shelf life is left, by default less than halfRiskconfigurable
The goods have no valid permit documentRiskconfigurable
No production date in Chestny ZNAK, so the remaining shelf life can’t be calculatedInfo
The product isn’t in the National CatalogRisk
The product isn’t among your cardsInfo
3

The UTD matches the goods

Lines, quantities, weight, batches, prices and document totals are checked against the codes

What it protects you fromYour records won’t diverge from reality, and mis-grading is visible already in the document
What we checkLevel
The quantity in a line doesn’t equal the number of codesRisk
The code of one product is entered in another product’s lineRisk
The same code is entered in the document twiceRisk
The same code is in another of your incoming UTDsRisk
The weight by codes doesn’t match the line weightRisk
The batch in the document isn’t the one the code has in Chestny ZNAKRisk
Line without codes: no GTIN or a wrong check digitStop
Line without codes: quantity, batches or weight don’t matchRisk
Price, VAT and document totals don’t match across linesInfo
The supplier is not among your trading partnersInfo
4

Boxes and pallets down to the unit

Packages of any nesting are opened down to each unit, and what’s above them is checked too

What it protects you fromYou won’t accept an empty box, and after receipt no package you didn’t know about will be disaggregated
What we checkLevel
The package doesn’t exist in Chestny ZNAK, is disaggregated or emptyStop
The package couldn’t be opened down to unitsStop
There are codes with a stop inside the packageStop
The box or pallet above the code isn’t in the document, isn’t in circulation or belongs to someone elseStop
The document has an ATK: it isn’t passed in a UTDStop
The code is in a package that isn’t in the UTD: after receipt, that package will be disaggregatedRisk
The package contains a product that isn’t in the document linesRisk
The code is listed both separately and as part of a packageInfo
5

Checking against the goods

The response to each scan comes right away, with no request to Chestny ZNAK, and the result is visible before signing

What it protects you fromYou sign for what actually arrived
What we checkDisplay and result
A code, box or pallet from the UTD. A box scan counts everything insideIn the UTD
A code from the UTD that has a stop: the item is counted, and the display asks you to set it asideSet aside
According to Chestny ZNAK, the code is in a box that isn’t in the UTDWarning
The code has already been scannedRepeat
The code isn’t in the UTD, but the document has this productSurplus
This product isn’t in the UTDMis-grading
More goods without codes than in the UTDSurplus
Not everything was scanned by the end of the checkShortage
6

After signing

Signing isn’t the end of receipt: Truemark waits for the Chestny ZNAK result and checks who owns the codes

What it protects you fromYou learn about a problem right away, not at the point of sale
What we checkDisplay and result
EDO Lite accepted the signature, and the document went to Chestny ZNAKStep result
Chestny ZNAK refused to process it: the error number and its meaningStop
Not all codes passed to you after the control requestStop
With a “Not accepted” result, the document’s codes are registered to youInfo
A corrected UTD from the supplier is checked the same way as the originalCheck

To open a UTD XML file without signing in to the account, use the UTD viewer: goods, codes and aggregates, a structure check and the printed form.

Check

With a scanner, on a handheld terminal or without scanning

The check answers whether the goods have arrived. A code with a finding also counts, and the display suggests setting it aside.

  • Scanner at the computer

    A regular scanner in COM port mode: the check runs right in the document card, with an instant response to each scan

    How to enable the COM port
  • Any handheld terminal model

    The “Receipt” section in the Truemark app. No need to pick a document: a scan opens the right UTD itself, and the display shows how many are confirmed. “Finish check” sends the result to the account.

    Handheld terminal app
  • Without scanning

    Trust-based receipt: you can sign at any moment, and the signing window shows how many units are accepted without a check

A setting defines how much to scan

Trust whole packagesBy default. Scanning a box or pallet confirms all the units inside; an opened box can be checked item by item.
Item by item onlyEach unit is confirmed by its own scan; a box scan only shows its contents

Chestny ZNAK errors

Errors 23, 63 and others in plain words

If a UTD has even one problem code, Chestny ZNAK rejects the whole document and reports only the error number, sometimes a quarter of an hour after signing. Truemark runs the official GIS MT preliminary check before signing and shows the error in words, with the code and the line.

Error23

The code doesn’t belong to the supplier

In Chestny ZNAK: “The participant has no authority to perform the operation with the marking code”

What it means
In Chestny ZNAK, the code is registered to another company, not the supplier. The supplier can’t transfer it, and Chestny ZNAK rejects the whole document: not a single code will pass to you.
What to do
Don’t sign with the “Accepted” result: ask the supplier to fix the document or sign with the “Not accepted” result
How Truemark catches it in advance
The owner is checked for every code, including inside boxes and pallets. The GIS MT preliminary check names such a code before signing, with the box and line.
Why a code is registered to another company
Error63

A document with this number and date has already been accepted

In Chestny ZNAK: “The UTD for the invoice is not valid: registered earlier or processed by a correction UTD”

What it means
A UTD from this supplier with the same number and date has already been processed in Chestny ZNAK. Chestny ZNAK won’t accept it again.
What to do
Ask the supplier to send a corrected UTD. The correction comes as a separate document and is checked the same way.
How Truemark catches it in advance
The document is compared with the supplier’s other incoming documents, and the GIS MT preliminary check catches the repeat before signing
UTD in marking: formats and corrections

More preliminary check errors

  • 22
    The code isn’t in GIS MT

    There is no such code in the marking system, or it was entered with an error. With it, the whole document won’t go through. Learn more

  • 24
    The code status isn’t suitable for transfer

    The code isn’t in circulation: only a code “In circulation” can be transferred. Learn more

  • 116, 117
    The code isn’t introduced into circulation

    The code is in the “Applied” or “Emitted” status: the supplier hasn’t put the goods into circulation yet. Learn more

  • 146
    The code was already transferred to you by another document

    The code already passed to you earlier, under another UTD

  • 141
    The goods can’t be transferred without codes

    The product group doesn’t allow volume and grade tracking: such goods are transferred with codes. Learn more

  • 142
    A line without codes is filled in against the rules

    A volume and grade tracking line is filled in with an error. Learn more

  • 10, 12, 13
    The supplier or buyer isn’t registered

    One of the parties isn’t registered in the marking system. Until it is, the document won’t go through.

All Chestny ZNAK error codes and what to do about them: in the blog article

Signature

Three receipt results and what follows them

You sign in the account with your own electronic signature. You can’t accept part of a document: discrepancies are recorded with the result and a text for the supplier, and a corrected UTD is checked the same way as the original.

1

“Accepted without discrepancies”

All codes will pass to you

Everything matched the document. Truemark uses a control request to check that the codes really became yours.

2

“Accepted with discrepancies”

All codes will be transferred to you. The supplier will correct the document according to your list.

Surplus, shortage or mis-grading. Until there’s a corrected UTD, you can’t sell the surplus: those aren’t your codes. Discrepancies download as an Excel file.

3

“Not accepted”

The codes stay with the supplier

For example, the document has someone else’s codes. You can’t sell the goods from the document until the supplier sends a correction.

Pricing

Receipt is included in Opti and Maxi

Incoming UTDs arrive via EDO Lite, which is on every plan. Marking codes are paid to Chestny ZNAK separately; Truemark doesn’t resell codes.

All plans and limits

Opti

Included

from ₽2,325a month, paid annually

  • Incoming UTD receipt
  • 1C integration
  • Handheld terminal license included

Maxi

Included

from ₽4,159a month, paid annually

  • Everything in Opti
  • Stock marking
  • Wildberries and Ozon, up to 30,000 a month

Mini

With a handheld terminal

₽10,000handheld terminal license per device

  • Receipt opens when a handheld terminal is connected to the account
  • Check and signing as in Opti

Demo

7 days

₽0no card required

  • All features, receipt too
  • Up to 10 products and 100 codes

Questions

Frequently asked questions

Didn’t find an answer? Write to us, and an expert will reply in 15 minutes on average. Step-by-step guides are in the knowledge base.

What is UTD receipt in Chestny ZNAK?

The buyer signs the supplier’s incoming UTD with their own title, and the marking codes pass to them in Chestny ZNAK. If the document has a foreign, retired or non-existent code, Chestny ZNAK rejects the whole document. Truemark checks every code before signing so such a document doesn’t go out.

Which documents can be accepted in Truemark?

UTDs in format 5.03 with the DOP or SCHFDOP function and corrected UTDs that arrive in your EDO Lite. An invoice without the transfer part, adjustment documents (UKD) and UTDs in old formats are shown in the list marked “Not supported”; they are accepted in EDO Lite.

Do I need to scan all the goods?

No. The check is optional: you can scan boxes, every unit, or sign without scanning. In “Trust whole packages” mode, a box scan counts everything inside. The signing window shows how many units are accepted without a check.

What scanner do I need for the check?

A regular scanner at the computer in COM port mode or any handheld terminal model with the Truemark app. On the handheld terminal you check the goods, and you sign the document in the account.

What happens if I sign a UTD with someone else’s code?

Chestny ZNAK rejects the whole document with error 23, and not a single code passes to you. The rejection may come a quarter of an hour after signing. Truemark checks the owner of every code and runs the GIS MT preliminary check before signing, so such a code is visible in advance.

How do I record discrepancies?

Sign with the “Accepted with discrepancies” result: the codes pass to you, and the supplier fixes the document from your list. Truemark drafts the discrepancy text from the checks and the scan check, and you can edit it. A corrected UTD is checked the same way as the original.

Who can sign a receipt?

Whoever signs shipping UTDs: the account owner or an employee with an MChD who signed in with an electronic signature. Signing goes through CryptoPro in the browser.

How many days do I have for receipt?

By default, 3 business days from the day after receipt; in the settings you can set from 1 to 30. On the day before the last day, at 10:00 Moscow time, a reminder comes to the account.

Which checks can be configured?

The level for expired shelf life, remaining shelf life and permit documents: stop, risk or info. The remaining shelf life threshold in percent, the receipt deadline, auto-loading of incoming documents and the scanning mode.

Which plan includes receipt?

Opti and Maxi; you can try it in the demo for 7 days free. On Mini, receipt opens with a connected handheld terminal, and the license costs ₽10,000 per device.

Accept your next UTD with a check

Connect EDO Lite in Truemark, and incoming documents appear on their own. 7 days of full access for free, no card required.

Try for freeSales: +7 812 765-02-50 · info@truemark.ru

Or leave a request

We’ll answer about volumes, pricing and getting started. Leave your phone or email and your question in the request form.