December 1New requirements for 5 groups: grocery products, animal feed, clothing and household linen, and 2 more · What to do
EN
Sign inTry for free

For manufacturers, importers and wholesalers

UTD shipment in Chestny ZNAK: code checks, signing and status in one window

You build a UTD from an introduction into circulation or with a scanner, and Truemark checks every code in Chestny ZNAK before signing: whether it’s in circulation, whether it’s yours and in which package. The document goes out via EDO Lite, and you see its status until the codes pass to the buyer.

3 questions
to Chestny ZNAK about each code: circulation, owner, package
1 code
of a box or pallet adds everything nested in it
1 min
interval at which the document status updates itself
EDO Lite
sending; the buyer can use any provider

How it works

Five steps from draft to codes with the buyer

UTD shipment is a section of the Truemark account. The document is checked before signing, not after Chestny ZNAK rejects it, and you see which code won’t go out and why.

  1. 1

    Create a UTD

    From “Put into circulation” with one icon: goods, codes and boxes assembled in Truemark go into the document on their own. Or from scratch, if the shipment has goods from different batches.

    Details come from the parties’ cards
  2. 2

    Add codes

    With a scanner, a .txt or .csv file, by hand or on a handheld terminal. A box or pallet code adds everything nested in it.

    A repeat scan won’t be doubled
  3. 3

    Check the codes

    Truemark asks Chestny ZNAK about each code: whether it’s in circulation, whether it’s registered to you and which package it’s in

    Unsuitable codes won’t go out
  4. 4

    Sign and send

    With an electronic signature via CryptoPro right in the browser. The document goes out via EDO Lite, and the buyer can use any provider.

    From Truemark, without the Chestny ZNAK account
  5. 5

    Track the status

    The status updates itself once a minute. After the buyer signs, Truemark waits for the Chestny ZNAK result: whether the codes have passed or not.

    The result is in the document list

Checks

What is checked before signing

The “Check codes” button asks Chestny ZNAK about each code in the document. The check runs in the background and ends with a “UTD checked” notification and the number of codes that won’t go out.

Code in circulation

A code that isn’t introduced yet, withdrawn or written off gets “The code is in a status not valid for transfer” and doesn’t go into the document

Code registered to you

“The code belongs to another participant…”: the code has already gone to another buyer or hasn’t been accepted by you yet. For goods without traceability, the owner isn’t checked.

Whole boxes and pallets

Truemark finds the package of each code in Chestny ZNAK, even one assembled in another system, and sends it with one code

Incomplete box

If the document has only some of a box’s codes, a warning appears above the table: the box will go to the buyer whole, along with the codes that aren’t in the document

No duplicates

A package and codes from it in one document: the package goes out once, and the nested codes don’t count toward quantity or value

The ATK doesn’t go out

“An ATK is not passed in a UTD”: the account suggests adding the product or box codes it contains

GIS MT authorization

The check runs under your token. If it has expired, the account asks you to renew the authorization and run the check again.

Before signing

Codes not checked: the account offers to “Check” them; because of a single problem code, Chestny ZNAK wouldn’t process the whole document

The buyer must be registered in Chestny ZNAK: only a participant in circulation can accept codes under a UTD. Check them in advance with the partner check.

How a UTD is built

Codes go into the document the way that suits your warehouse

Details are filled in from your company and the buyer’s card, prices from the price list. Truemark remembers the document type, the transaction content and the basis per buyer.

From an introduction into circulation

A “Put into circulation” request has a “Create UTD” icon: the request’s codes and the boxes assembled in Truemark are already in the document, and the check starts by itself. Several requests can go into one UTD.

Put into circulation

Scanner, file, by hand

A scanner in COM port mode, a .txt or .csv file up to 2 MB with a report on every code that didn’t fit, or a pasted code. A box or pallet with one code.

How to add codes

On a handheld terminal

Fill a UTD with codes right in the warehouse: a terminal with the Truemark app, any Android model

Handheld terminal app

Then into 1C

The finished UTD is loaded into 1C as a sales document with the full code hierarchy, using the Truemark add-on

Marking in 1C

Variable-weight goods

Truemark takes the weight of each code from Chestny ZNAK: in the “Quantity / weight” line, with the price per kilogram

Variable-weight goods

After sending

The status is visible until the codes pass

Until the buyer signs the UTD, the codes stay with you. After they sign, Truemark waits for Chestny ZNAK’s response and shows the result in the document list.

  1. SendingSigned, passing to the EDI provider
  2. DeliveredWith the buyer, awaiting signature
  3. Sending to GIS MTThe buyer signed, the document is going to Chestny ZNAK
  4. Fully acceptedCodes pass to the buyer

If something went wrong

  • Clarification needed

    The buyer rejected the document; their comment is in the tooltip by the status

    “Copy and fix”: the copy opens right away
  • Not accepted

    The buyer refused to accept the goods

    “Copy” and send a corrected document
  • Not accepted in GIS MT

    The buyer signed, but Chestny ZNAK didn’t transfer the codes. The reason and advice are in the tooltip.

    “Copy”, then “Check codes” in the copy
  • Sending error

    The document didn’t reach the buyer: an EDI provider failure or no roaming

    “Sync”, then “Copy”
  • Accepted with discrepancies

    The buyer signed but didn’t accept everything

    Ask the buyer what wasn’t accepted
  • Cancellation pending

    You requested cancellation of a signed UTD

    After the buyer signs, the codes return to you

A sent UTD doesn’t go out again; the way out is a copy: a draft with the same goods, codes and details. Its date is today’s and its number stays the same. XML, PDF and the archive with signatures download from the same menu.

Pricing

Shipping with a UTD on all plans

Sending UTDs works through the EDO Lite module. Marking codes are paid to Chestny ZNAK separately, ₽0.61 including VAT; Truemark doesn’t resell codes.

All plans and limits

Mini

Included

from ₽1,409a month, paid annually

  • UTD shipment via EDO Lite
  • Code checks before signing

Opti

Included

from ₽2,325a month, paid annually

  • UTD shipping and receipt
  • 1C integration
  • Handheld terminal license included

Maxi

Included

from ₽4,159a month, paid annually

  • Everything in Opti
  • Stock marking
  • Wildberries and Ozon, up to 30,000 a month

Demo

7 days

₽0no card required

  • All features, shipment too
  • Up to 10 products and 100 codes

Questions

Frequently asked questions

Didn’t find an answer? Write to us, and an expert will reply in 15 minutes on average. Step by step in the knowledge base.

How do I send a UTD with marking codes?

Create a UTD in Truemark from “Put into circulation” or from scratch, add the codes, click “Check codes”, then “Sign and send”. The document is signed with your electronic signature in the browser and goes out via EDO Lite.

Which EDI provider does the UTD go through?

Through EDO Lite, the Chestny ZNAK provider. The buyer can work with any provider: their EDI subscriber ID goes in the counterparty card. If the provider is different, roaming with EDO Lite is needed.

What does Truemark check before sending?

For each code, Truemark asks Chestny ZNAK whether the code is in circulation, whether it’s registered to you and which package it’s nested in. Codes that fail the check won’t go into the document, and boxes and pallets go out whole.

Can I add a box or pallet with one code?

Yes. A box or pallet code (SSCC) unfolds in the document, and Chestny ZNAK receives the code of the package itself. An ATK code is not passed in a UTD.

Do I need to do anything in the Chestny ZNAK account?

No. The UTD is created, signed and sent from Truemark. Chestny ZNAK receives the document from the EDI provider and transfers the codes to the buyer itself after they sign. The Chestny ZNAK account may be needed for roaming.

When do the codes pass to the buyer?

After they sign. Until the buyer signs the document, the codes stay with you. If they reject it, the codes also stay with you.

How do I correct a sent UTD?

A sent document doesn’t go out again. If the buyer rejected it, click “Copy and fix”. If they signed it, request cancellation and then send the copy.

How long do I wait for the status?

The status updates itself once a minute. To avoid waiting, click “Sync” in the row menu. The buyer signs the document when they open it in their own EDI system.

Can I ship goods without codes?

Yes, if your product group allows volume and grade tracking: the UTD will carry GTINs and quantities.

Do I need a separate plan to send UTDs?

Sending UTDs works through the EDO Lite module in the plan. 7 days of full access for free, no card required.

Send your first UTD with a check

Add a buyer and codes, and Truemark checks each one before signing. 7 days of full access for free, no card required.

Try for freeSales: +7 812 765-02-50 · info@truemark.ru

Or leave a request

We’ll answer about volumes, pricing and getting started. Leave your phone or email and your question in the request form.