December 1New requirements for 5 groups: grocery products, animal feed, clothing and household linen, and 2 more · What to do
EN
Sign inTry for free

Meat, dairy, semi-finished products

Marking variable-weight goods: a label with weight and code in one pass

You put the goods on the scales, the weight settles, and the printer prints one label: a DataMatrix code with the weight inside, the production and application dates, net and gross weight. At this moment the package weight is already recorded in the application report.

In the application report: 0.640 kg

3103
“Tsarskaya” basturma Net weight: 0.640 kg Gross weight: 0.655 kg Production date: 20.11.2026Application date: 21.11.2026Best before: 20.01.2027

(01)04607002000012(21)5Ab9kQ(93)Xk9p(3103)000640

1
label: code, weight and dates together
3103
weight inside the DataMatrix code itself
0
manual entry: the weight comes from the scales
up to 8
handheld terminals per computer with a station

Label

Everything you need, on one label

The station prints with your template. The weight comes from the scales, the dates from the application, the code from the order. No second label or second pass needed.

13103
“Tsarskaya” basturma 2Net weight: 0.640 kg 3Gross weight: 0.655 kg 4Production date: 20.11.20265Application date: 21.11.20264Best before: 20.01.2027

(01)04607002000012(21)5Ab9kQ(93)Xk9p(3103)000640

Gross = net + tare. Without tare, gross equals net.

  1. 1
    DataMatrix with weight in the code

    Identifier 3103 and six digits: 3103000640 means 0.640 kg. The weight group comes last, after the verification code.

  2. 2
    Net weight

    The weight from the scales at the moment it settled. The same weight goes into the application report.

  3. 3
    Gross weight

    Net plus tare. The package weight is saved with the product once and applies at all of the company’s stations.

  4. 4
    Production date and “Best before”

    Taken from the application. If the card has a shelf life, the station calculates “Best before” itself.

  5. 5
    Application date

    The “Current date” variable: the day the label is printed. Its caption can be anything.

  6. 6
    Your template

    Size, product columns, logo: in the editor. The station checks that the weight, dates and code are on the template.

From card to shipment

Variable-weight goods from card to UTD

Five steps, and the weight is never retyped by hand: it’s taken from the scales once and travels along the chain on its own.

  1. 1

    Product card

    Variable-quantity product
    Yes
    Weight range, from
    0.300 kg
    Weight range, to
    0.900 kg

    Product card

    In the National Catalog, the variable weight is flagged and a range is set. Truemark reads them from the card.

  2. 2

    Order No. 1042

    “Tsarskaya” basturma500 codesReceived
    “Rossiysky” cheese, by weight200 codesReceived

    Code orders

    Codes are ordered as usual. Nothing is printed in advance: the station takes codes from the order itself.

  3. 3
    640 gTake the product off

    Card range: 300–900 g

    Marking station

    The goods are on the scales, and the label is printed. The station doesn’t print a weight outside the card range, and no code is spent.

  4. 4

    Codes · weight (kg)

    …5Ab9kQ0.640
    …8Cd2mW0.712
    …3Ef7pR0.585
    Total1.937

    Code application report

    Each code already has its weight; for meat products, there’s a “Total” at the bottom. After the batch, “Sign and send”.

  5. 5

    UTD No. 418

    ProductQuantity / weightPrice / per kg
    “Tsarskaya” basturma8 / 4.894 kg1,890.00

    Introduction into circulation and UTD

    Truemark takes the weight of each code from Chestny ZNAK. In the UTD, “Quantity / weight” and the price per kilogram.

Comparison

Three ways to mark variable-weight goods

The main difference is where the codes come from and how the weight gets into the application report. In detail: scales with printing, or scales and a printer and if the codes are already stuck on.

TruemarkMarking station

Labels per package
One: weight, dates and code
Where the codes come from
From the order in Truemark; the station gets them itself
Weight in the application report
Immediately, at the moment of printing
What you need
Scales, a label printer, a computer with Truemark Connect

Scales with label printing

Labels per package
One
Where the codes come from
A file to the scales, provided by the accounting system
Weight in the application report
The scales write a file with the code and weight; then you need an accounting system
What you need
Scales with printing and a system for file exchange

A separate label and a scan

Labels per package
Two: with dates and with the code
Where the codes come from
Ordered and printed in advance
Weight in the application report
After scanning each package
What you need
Scales, a printer, a scanner

Equipment

Scales and printer: by cable or over the network

The printer always works via Truemark Connect on a Windows computer; its installation takes a few minutes. Scales with a cable connect right in the browser; network scales via Connect. You probably already have much of this.

Scales by cable

USB or RS-232, right in the browser

  • Massa-K, protocol 100
  • MERTECH M-ER, POS2-M or CAS-M
Scales over the network

Via Connect; no cable to the computer needed

  • Massa-K on an RP terminal
  • MERTECH M-ER 725
  • CAS CL5000, CL5000J, CL3000
  • Other network scales
Computer and Truemark Connect

Windows 10 or newer, Chrome, Edge or Yandex Browser

  • Finds scales and printers on the network itself
  • Links to the account without a code, with confirmation in a Windows window
Label printer

Installed in Windows or on the network, port 9100

  • TSPL: TSC, ATOL, Xprinter
  • ZPL: Zebra, Honeywell, Datamax
  • EZPL: Godex
  • 203, 300 or 600 dpi
Handheld terminal: optional

The terminal works as a station on the same network

  • Up to 8 handheld terminals per computer
  • Tare with the “+ tare” button

A scanner is optional: to pick a product by EAN-13 and check a label; whether GS separators come through from it and whether there’s a Russian layout is shown by the scanner check. How to connect everything step by step: scales and printer at the station; the list of models: scales for marking. Massa-K label scales over the network: how to connect the RP10.

For the operator

Display color visible from a distance

Full screen leaves the operator the display, the label and the print mode. The text on the display says what to do while the hands are busy with the goods.

  • GrayPut the product on

    The station is waiting for the operator. The label prints by itself when the weight settles.

  • Light lilacWeighing…

    The weight is still changing. No code is issued until the weight settles.

  • PurplePrinting…

    The label is about to come out. At this moment the code with its weight is already recorded in the application.

  • GreenTake the product off

    Label printed. The next one prints only for a new item: the scales must be empty.

  • OrangeTake it off and put it back

    A load was on the scales in advance. No accidental label; the operator decides.

  • RedWeight out of range

    The weight is outside the card range: no label, the code isn’t used

Duplicate last

The label got crumpled: the same code prints, no new one is spent

Defective

The code is removed from the report and doesn’t reach Chestny ZNAK as applied

Station log

Who printed each label, where and with what weight. Search by code with a scanner; the list downloads

Weight in the code

Weight right in the code: 3103 and six digits

The station adds the weight to the code on the label itself. The setting is on by default and can be turned off; the weight goes into the application report in any case.

(01)04607002000012Product GTIN(21)5Ab9kQserial numberGS(93)Xk9pverification codeGS(3103)0006400.640 kg
  • Meat productsAllowed, at the participant’s discretion
  • Dairy productsAllowed, at the participant’s discretion
  • Semi-finished and frozenWe advise turning it off: the operator’s documentation doesn’t allow it

Weight in the code makes it possible not to weigh the goods a second time if the store’s checkout or accounting system reads it from the code. That depends on the specific chain. In detail, with sources: weight in the marking code, AI 3103; how codes of different groups look: marking code examples; a code for test printing: GS1 DataMatrix generator.

Handheld terminals

Station on a terminal

The scales and printer stay at the computer with Truemark Connect, and the operator works on a handheld terminal on the same network: picks the order and product, puts the goods on the scales, and the label prints by itself. Tare is accounted for just as at the station in the account.

up to 8
handheld terminals per computer
1
the “Station on a handheld terminal” switch in Connect
Handheld terminal app

Who it's for

Which goods with variable weight fit

Weight per code is needed in three product groups. The condition: the card has the variable weight flagged and a range set.

Meat and sausages

Basturma, ham, delicacies, slices, sausages. Meat products have been marked since August 1, 2026, sausages since October 1, 2026.

Meat products Sausage

Dairy products

Cheese in wheels and slices, cottage cheese, butter and sour cream in weighed packages

Dairy products Cheese

Semi-finished and frozen

Weighed semi-finished products and frozen products packed with variable weight

Semi-finished products

The station also prints piece goods: one EAN-13 scan, one label. It prints seafood and feed the same way; for these groups, Truemark doesn’t pass the weight. The whole marking line is on the page Marking station.

Pricing

The station works on any plan

You need an active plan; the demo works too. Marking codes are paid to Chestny ZNAK separately, ₽0.61 including VAT; Truemark doesn’t resell codes.

All plans and limits

Mini

Included

from ₽1,409a month, paid annually

  • Marking station
  • Handheld terminal license: ₽10,000 per device

Opti

Included

from ₽2,325a month, paid annually

  • Marking station
  • Handheld terminal license free, the next one ₽5,000

Maxi

Included

from ₽4,159a month, paid annually

  • Marking station
  • Integration of your scales with annual payment
  • Handheld terminal license included

Demo

7 days

₽0no card required

  • The station too
  • Up to 10 products and 100 codes

Questions

Frequently asked questions

Didn’t find an answer? Write to us, and an expert will reply in 15 minutes on average. Step by step in the knowledge base.

What are variable-weight goods in marking?

Goods with variable weight: one GTIN, but each package has its own weight. The weight of each package is passed to Chestny ZNAK in the application report.

How do I mark variable-weight goods in Truemark?

At the Marking station. Open it from the order’s application, pick the product and put it on the scales. When the weight settles, the printer prints a label with the weight, dates and code. The weight is already in the application report; after the batch, you just sign the report.

When did marking of meat products start?

Meat products (HS 1602) have been marked since August 1, 2026, sausage products (HS 1601 00) since October 1, 2026.

Does the station fit basturma and sausage sold by weight?

Yes. The card needs the “Variable-quantity product” flag and a weight range. The product has one GTIN, but each package has its own code and weight: a 0.640 kg piece and a 0.712 kg piece go with different codes.

Is the gross weight printed on the label?

Yes, if the template has the “Gross weight” variable. Gross is net plus the tare the station weighed the goods with. The tare weight is saved with the product once.

Do I need a scanner?

Not by default. A scanner is needed to pick products by EAN-13 or to check every label. If the company has blocking of reports without scans turned on, a scan is required.

Which scales work?

By cable in the browser: Massa-K with protocol 100 and MERTECH M-ER with the POS2-M or CAS-M protocol. Over the network via Truemark Connect: Massa-K with label printing on an RP terminal, MERTECH M-ER 725, CAS CL5000, CL5000J and CL3000 and other network scales.

Which label printer do I need?

A printer with the TSPL, ZPL or EZPL language: TSC, ATOL, Xprinter, Zebra, Honeywell, Datamax, Godex. It’s installed in Windows or connected to the network.

Is the weight written into the code itself?

By default, yes; the setting can be turned off. The weight goes into the application report in any case. For semi-finished and frozen products, we advise turning the setting off.

What happens if the weight is outside the card range?

The display turns red, the label doesn’t print, and the code isn’t used. If the weight is correct, fix the range in the card in the National Catalog and sync the card in Truemark.

A label got damaged. What do I do?

“Duplicate last” prints the same code, and no new one is spent. Mark the extra label in the log with the “Defect” button: the code leaves the report.

Can I mark variable-weight goods from a handheld terminal?

Yes. The terminal works as a station: the scales and printer stay at the computer with Truemark Connect, and the operator works on a handheld terminal on the same network. Up to 8 handheld terminals per computer.

Does the station work without internet?

No, the code is issued by the server at the moment of weighing.

Does the station fit seafood and feed?

Yes, as for piece goods: one EAN-13 scan, one label. Truemark doesn’t pass the weight for these groups.

Mark variable-weight goods in one pass

Connect the scales and the printer, and put the first item on the scales. 7 days of full access for free, no card required.

Try for freeSales: +7 812 765-02-50 · info@truemark.ru

Or leave a request

We’ll answer about volumes, pricing and getting started. Leave your phone or email and your question in the request form.