Declarations, certificates, state registration certificates, with GIS MT requirements in mind
Permit documents for marking, turnkey
We determine which document your product needs and arrange it with accredited partners so it passes Chestny ZNAK checks: number format, register, status, GTIN list and the applicant’s authority. You enter the finished document in the product card yourself. We have worked with marking since 2019, since it launched in Russia.
we’ll calculate the time and cost for your product
why it stopped being a formality
You used to be able to write almost anything in the document. Now the system checks it
Chestny ZNAK matches the document with registers, tracks its status and compares it with the product card. An inaccuracy in a document used to go unnoticed for years. Now it surfaces right away, at the very first operation with the goods.
01moderation
The card doesn’t pass moderation
The National Catalog returns the card with the status “Needs changes”: the number isn’t in the right format, the document isn’t in the register, or the data differs from the card.
Truemark
The card status from the National Catalog is visible in the Truemark account
02goods stuck
Introduction into circulation is rejected
Codes received, labels printed, goods ready, but the system won’t accept the introduction data. The batch sits in the warehouse.
Truemark
The document from the introduction is checked against the National Catalog card: if it isn’t there, Truemark warns you before sending
03the whole filing
One document brings down the whole filing
There’s no partial processing: if a filing has several documents and at least one fails the check, the whole document with the data is rejected.
Truemark
A warning about an expired or invalid document is visible in the introduction line before sending
04sales stop
The checkout stops ringing up the goods
A terminated or invalidated document blocks retail sales. So far this check is mandatory for five groups (water, beer, footwear, tires, perfume), but the checkout check itself works for all product groups, and the list will expand.
Truemark
At UTD receipt, you see if the goods have no valid permit document or it’s about to expire
05document revoked
An EAEU document is switched off along with its body
Rosaccreditation suspends documents issued with violations in other union countries and stops entire certification bodies from operating.
Truemark
If Chestny ZNAK considers the card’s document invalid, Truemark warns you before introduction into circulation
06fine
Fines and confiscation
Violating technical regulations and misleading declarations: up to ₽1 million for a legal entity under Art. 14.43–14.46.2 of the Code of Administrative Offenses, with possible confiscation of the batch.
Truemark
The term and validity of the card’s document are checked against Chestny ZNAK before every introduction
the main thing the market doesn’t know
The fate of the goods is decided not by the document’s validity period but by its status group
Chestny ZNAK divides permit documents into three groups. Which one yours falls into determines whether you can release new batches and sell those already released.
Green group
Everything is allowed. Valid, signed and valid, resumed, extended, awaiting the register operator’s check. Introduction into circulation, circulation, retail, withdrawal from circulation: no restrictions.
Yellow group
New releases closed, the warehouse lives on. Suspended, terminated, expired, withdrawn by the applicant, not found in the register. You can’t introduce into circulation, but you can sell what’s already introduced.
Red group
The goods are dead along the whole chain. Canceled or declared invalid by a supervisory authority. You can’t introduce into circulation, circulate or sell to the end consumer.
seven checks
What Chestny ZNAK checks in a document
We keep this list in mind when arranging a document: the certification center covers the technical regulation requirements, and we make sure the document also passes the marking system’s checks.
Send a request- Number format. The mask, spaces, Cyrillic versus Latin
- Presence in the registers of Rosaccreditation, Rospotrebnadzor and the EEC
- Status group: green, yellow or red
- Whether the document is mandatory for your product group
- Justification of absence: if the goods aren’t subject to conformity assessment
- Match with the product card at introduction into circulation
- Matching characteristics: HS code, name, trademark, group attributes
a trend best prepared for in advance
A document narrows down to a specific product and a specific company
A “universal” declaration for a broad category used by dozens of sellers stops working. Two checks close this practice.
Link to GTIN
A product card is rejected at moderation if the document has no GTIN corresponding to the product code. It isn’t enough for the document to be “about such products in general”: it has to list your product specifically.
Authority check
When goods made in Russia are introduced into circulation, the document is rejected if the participant filing it isn’t the applicant under that document and isn’t a user granted the right to use it.
Form of confirmation
The document must match the conformity assessment form required by the regulations. If certification is required, you can’t substitute a declaration for a certificate: such a document won’t be accepted.
how the work goes
From request to a document that withstands the checks
We don’t issue documents ourselves: they’re arranged by the accredited certification bodies and laboratories we work with. Our part is to determine the right form and scheme, run the process and make sure the document gets the data the marking system expects.
-
1
We look at the product and its requirements
We look at what you make or import, which technical regulations apply and in what form conformity must be confirmed
Result: it’s clear which document the product needs -
2
We determine the right document and scheme
A declaration, a certificate or a state registration certificate is determined by regulations, not preference. Then we choose the scheme: serial production, a batch or a single item.
Result: the right form of confirmation, not the cheaper one -
3
We collect documents and arrange testing
We prepare a package for your role: manufacturer, importer or authorized person. Samples go to an accredited laboratory, and you get a test report.
Result: a report from a laboratory with a valid accreditation -
4
We register the document
The applicant registers a declaration themselves, via the FGIS Rosaccreditation service, with an electronic signature. A certificate is issued by an accredited body. We run the process and make sure the document gets the right data.
Result: the document is in the register, status “valid” -
5
We agree on the document’s contents before release
The document must include your GTINs, the correct HS code, the trademark and the right applicant. The certification body enters these details at issue, and we agree on the contents in advance so the document doesn’t have to be redone.
Result: the document has everything the system will check later -
6
We hand over the document and its details
We hand over the finished document and the data for the product card: the type, number and date exactly as the system expects them. You can enter them in the National Catalog card yourself.
Result: the document is valid and ready to use How permit document checks work: a detailed breakdown →
what we can arrange
What we arrange
We work with any Chestny ZNAK product group. If you’re not sure which document your product needs, that’s exactly where we start.
Discuss my product- Declaration of conformity CU TR and EAEU TR
- Certificate of conformity: serial production, a batch or a single item
- State registration certificate (SGR)
- Exemption letter and a correct justification for the missing document in the card
- Reissue when the composition, manufacturer or production site changes
- Adding GTINs and users to a document already in force
- A new document to replace a suspended or canceled one
why us
A document that “just exists” and a document that passes the system are two different documents
A certification center covers the technical regulation. We also look at marking
A common story: a client gets a declaration, enters its number in the National Catalog, and the card fails moderation. The document has the wrong HS code, no trademark, no GTIN listed, or another company as the applicant. By the technical regulation the document is flawless, but for the marking system it doesn’t work.
We have worked with marking since 2019 and know exactly what the system checks in a document. So we make sure the necessary details get into it at the arrangement stage, not discovered later when the batch is already stuck.
request
Tell us about your product, and we’ll come back with a clear plan
The more precise the initial data, the more specific the answer. We need to understand the product group, your role and what has already been arranged: both the time and the cost depend on it.
Need a service to handle marking yourself? Take a look at Truemark pricing.
Need help with marking?
An expert replies in English in the account chat in 15 minutes on average, 7 days a week. 7 days of full access for free, no card required.
frequently asked questions
Permit documents: the essentials
Didn’t find an answer? An expert replies in the account chat in 15 minutes on average. More answers in the knowledge base and blog.
Which document does my product need?
It’s determined by the technical regulation, not the company’s choice. Somewhere a declaration of conformity is enough, somewhere a certificate is mandatory, and for certain categories a state registration certificate is needed. You can’t substitute a declaration where a certificate is required: the system won’t accept such a document. Working out the right form is the first step of our work.
How much does it cost?
It depends on the product, the technical regulation, the conformity assessment scheme and the scope of testing. The range is wide: a declaration for simple products and a certificate for children’s goods differ by an order of magnitude. We calculate for your specific product after a short conversation.
How long does it take?
From a few days for simple declarations to several weeks if laboratory testing, a production assessment or a state registration certificate is needed. We name the exact time after we determine the form of confirmation and the scheme.
Do you issue the documents yourselves?
No, and that’s a matter of principle. Documents are arranged by accredited certification bodies and laboratories, our partners. By law, the applicant registers a declaration themselves with their electronic signature. We run the process and are responsible for the right scheme and for making the document work in Chestny ZNAK.
I already have a declaration. Why might it not work?
Because “the document exists” and “the document passes the system” are different things. Common reasons for rejection: the number doesn’t match character for character, the document isn’t in the register, the HS code is wrong, there’s no trademark, no GTIN is listed, or another company is named as the applicant. What exactly the system checks is covered in a separate article; if your current document won’t do, we’ll arrange a new one.
My document was suspended. What should I do?
Suspension is the yellow zone: you can’t introduce new batches into circulation, but goods already introduced can be sold and shipped. To continue releasing goods, you need a valid document. If the document was canceled or declared invalid, that’s the red zone, where retail sales stop too.
The goods won’t ring up at the checkout because of the document. Can you help?
Yes. Since April 1, 2026, a sale is blocked if supervisory authorities have terminated the document or declared it invalid. So far this check is mandatory for five groups (packaged water, beer, footwear, tires, perfume), but the checkout check itself works for all product groups, and the list will expand. We’ll arrange a new document to replace the terminated one; then you enter it in the product card and adjust the link to the codes.
Do you work with documents from EAEU countries?
Yes, but we warn you about the risks. Since late 2025, Rosaccreditation can suspend in Russia documents issued with violations in other union countries, and since 2026 it can terminate all documents of a body that has collected three suspensions in a year. A cheap document from a neighboring country may be switched off together with the body that issued it.
We’re an importer. Is there anything special?
Yes. Document details come into the system from the Federal Customs Service together with the goods declaration, and they must match the card: a match on at least one document is enough, but if they differ, introduction into circulation fails. We take this into account in advance so the batch doesn’t get stuck at customs or after it.
We work with clothing. What changes on September 1, 2026?
From this date, manufacturers, importers and cross-border traders of light industry goods will be refused introduction into circulation if the permit document details aren’t entered in the product card in advance. It’s worth putting the cards in order by the end of August. Details in the breakdown of permit document checks.
A document that fails the check means your goods are stopped
It’s cheaper to sort out documents before a batch gets stuck at introduction into circulation or stops ringing up at the checkout.
See also: how permit document checks work · permit mode at checkouts · marking for manufacturers · for importers